Allied Machine & Engineering

Brands

AME (2346) Brands AME AME
AME® (5279) Brands AME%C2%AE AME®

Manufacturer

Allied Machine & Engineering (7625) Manufacturer Allied+Machine+%26+Engineering Allied Machine & Engineering

Category

Arbor Nuts (9) Category Arbor+Nuts Arbor Nuts
Boring Bar Sets (16) Category Boring+Bar+Sets Boring Bar Sets
Boring Bars (152) Category Boring+Bars Boring Bars
Boring Head Accessories (27) Category Boring+Head+Accessories Boring Head Accessories
Boring Head Arbors, Shanks & Adapters (74) Category Boring+Head+Arbors%2C+Shanks+%26+Adapters Boring Head Arbors, Shanks & Adapters
Boring Heads (13) Category Boring+Heads Boring Heads
Boring Inserts (120) Category Boring+Inserts Boring Inserts
Collet Chuck Accessories (6) Category Collet+Chuck+Accessories Collet Chuck Accessories
Collet Chucks (5) Category Collet+Chucks Collet Chucks
Collet Wrenches (9) Category Collet+Wrenches Collet Wrenches
Collets (1) Category Collets Collets
Coolant Adapters & Collars (12) Category Coolant+Adapters+%26+Collars Coolant Adapters & Collars
Drill Adapters (5) Category Drill+Adapters Drill Adapters
Drill Bodies (715) Category Drill+Bodies Drill Bodies
Drill Cartridges (43) Category Drill+Cartridges Drill Cartridges
Drill Heads (218) Category Drill+Heads Drill Heads
Drill Inserts (628) Category Drill+Inserts Drill Inserts
Drilling Chamfer Rings (4) Category Drilling+Chamfer+Rings Drilling Chamfer Rings
Drilling Head Accessories (31) Category Drilling+Head+Accessories Drilling Head Accessories
Drive Bits For Indexables (5) Category Drive+Bits+For+Indexables Drive Bits For Indexables
Grinding Fixtures (8) Category Grinding+Fixtures Grinding Fixtures
Helical Flute Thread Mills (362) Category Helical+Flute+Thread+Mills Helical Flute Thread Mills
Indexable Boring Bar Sets (33) Category Indexable+Boring+Bar+Sets Indexable Boring Bar Sets
Indexable Boring Bars (130) Category Indexable+Boring+Bars Indexable Boring Bars
Indexable Porting Tools (58) Category Indexable+Porting+Tools Indexable Porting Tools
Indexable Thread Mills (31) Category Indexable+Thread+Mills Indexable Thread Mills
Jobber Length Drill Bits (123) Category Jobber+Length+Drill+Bits Jobber Length Drill Bits
Keys & Drivers For Indexables (21) Category Keys+%26+Drivers+For+Indexables Keys & Drivers For Indexables
Long Length Drill Bits (72) Category Long+Length+Drill+Bits Long Length Drill Bits
Modular Adapters (28) Category Modular+Adapters Modular Adapters
Modular Boring Cutting Unit Heads (66) Category Modular+Boring+Cutting+Unit+Heads Modular Boring Cutting Unit Heads
Modular Reductions & Extensions (10) Category Modular+Reductions+%26+Extensions Modular Reductions & Extensions
O-Rings For Indexables (8) Category O-Rings+For+Indexables O-Rings For Indexables
Pins For Indexables (14) Category Pins+For+Indexables Pins For Indexables
Plates For Indexables (1) Category Plates+For+Indexables Plates For Indexables
Screws For Indexables (9) Category Screws+For+Indexables Screws For Indexables
Short Length Drill Bits (81) Category Short+Length+Drill+Bits Short Length Drill Bits
Spade Blade Holders (491) Category Spade+Blade+Holders Spade Blade Holders
Spade Drill Inserts (3796) Category Spade+Drill+Inserts Spade Drill Inserts
Spare Parts Packages For Indexables (9) Category Spare+Parts+Packages+For+Indexables Spare Parts Packages For Indexables
Straight Flute Thread Mills (26) Category Straight+Flute+Thread+Mills Straight Flute Thread Mills
Threading Inserts (148) Category Threading+Inserts Threading Inserts
Wrenches For Indexables (7) Category Wrenches+For+Indexables Wrenches For Indexables

Actuation Type

Automatic/Manual (4) Actuation Type Automatic%2FManual+ Automatic/Manual
Manual (9) Actuation Type Manual+ Manual

Applicable Materials

Stainless Steel, Inconel, Hastelloy and Titanium (204) Applicable Materials Stainless+Steel%2C+Inconel%2C+Hastelloy+and+Titanium+ Stainless Steel, Inconel, Hastelloy and Titanium

Blade Range

Body Diameter

1/8 in (1) Body Diameter 1%2F8+in 1/8 in
3/4 in (1) Body Diameter 3%2F4+in 3/4 in
1 in (1) Body Diameter 1+in 1 in
1-1/2 in (1) Body Diameter 1-1%2F2+in 1-1/2 in
2 in (2) Body Diameter 2+in 2 in
3 in (5) Body Diameter 3+in 3 in
4 in (1) Body Diameter 4+in 4 in
76 mm (2) Body Diameter 76+mm 76 mm

Bore Diameter

Cartridge Location

Outer (39) Cartridge Location Outer+ Outer

Cutting Diameter

Cutting Direction

Right Hand (28) Cutting Direction Right+Hand+ Right Hand

Diameter

Drill Depth

Drill Diameter Measurement System

Imperial (95) Drill Diameter Measurement System Imperial+ Imperial
Metric (109) Drill Diameter Measurement System Metric+ Metric

Drill Size - Decimal Inch

Drill Size - Fraction

Drill Size - Letter

D (1) Drill Size - Letter D+ D
I (1) Drill Size - Letter I+ I
Q (1) Drill Size - Letter Q+ Q
U (1) Drill Size - Letter U+ U

Drill Size - Metric

Drilling Application

Drilling, Boring, Facing and Standard Turning (3) Drilling Application Drilling%2C+Boring%2C+Facing+and+Standard+Turning+ Drilling, Boring, Facing and Standard Turning
High Penetration Drilling (556) Drilling Application High+Penetration+Drilling+ High Penetration Drilling

Drive Rod Thread Size

5/16-18 UNC (2) Drive Rod Thread Size 5%2F16-18+UNC+ 5/16-18 UNC
3/8-16 UNC (1) Drive Rod Thread Size 3%2F8-16+UNC+ 3/8-16 UNC
1/2-13 (4) Drive Rod Thread Size 1%2F2-13+ 1/2-13
M8x1.25 (2) Drive Rod Thread Size M8x1.25+ M8x1.25
M10x1.5 (3) Drive Rod Thread Size M10x1.5+ M10x1.5

Drive Size

IP6 (2) Drive Size IP6+ IP6
IP7 (2) Drive Size IP7+ IP7
IP8 (2) Drive Size IP8+ IP8
IP9 (2) Drive Size IP9+ IP9
IP10 (1) Drive Size IP10+ IP10
IP15 (2) Drive Size IP15+ IP15
IP20 (1) Drive Size IP20+ IP20
IP25 (1) Drive Size IP25+ IP25
IP30 (1) Drive Size IP30+ IP30

Drive Type

Torx® (7) Drive Type Torx%26reg%3B+ Torx®
Torx® Plus (21) Drive Type Torx%26reg%3B+Plus+ Torx® Plus

Finish

AM200® Coated (583) Finish AM200%26reg%3B+Coated+ AM200® Coated
CVD Coated (1) Finish CVD+Coated+ CVD Coated
CVD Diamond Coated (93) Finish CVD+Diamond+Coated+ CVD Diamond Coated
PVD Coated (1) Finish PVD+Coated+ PVD Coated
TiAlN Coated (1219) Finish TiAlN+Coated+ TiAlN Coated
TiCN Coated (507) Finish TiCN+Coated+ TiCN Coated
TiN Coated (1447) Finish TiN+Coated+ TiN Coated
Uncoated (341) Finish Uncoated+ Uncoated

For Use On

Aluminum, Cast Iron, Stainless Steel and Steel (556) For Use On Aluminum%2C+Cast+Iron%2C+Stainless+Steel+and+Steel+ Aluminum, Cast Iron, Stainless Steel and Steel
Cast Iron (1) For Use On Cast+Iron+ Cast Iron
Stainless Steel (2) For Use On Stainless+Steel+ Stainless Steel
Steel, Heat Resistant Alloys, Titanium, Stainless Steel, Cast Iron, Non-Ferrous Metals and Non-Metals (1) For Use On Steel%2C+Heat+Resistant+Alloys%2C+Titanium%2C+Stainless+Steel%2C+Cast+Iron%2C+Non-Ferrous+Metals+and+Non-Metals+ Steel, Heat Resistant Alloys, Titanium, Stainless Steel, Cast Iron, Non-Ferrous Metals and Non-Metals
Steel, Stainless Steel and Cast Iron (2) For Use On Steel%2C+Stainless+Steel+and+Cast+Iron+ Steel, Stainless Steel and Cast Iron

Geometry

Cast Iron (93) Geometry Cast+Iron+ Cast Iron
Flat Bottom (304) Geometry Flat+Bottom+ Flat Bottom
High Impact Notch Point® (12) Geometry High+Impact+Notch+Point%26reg%3B+ High Impact Notch Point®
Notch Point® (50) Geometry Notch+Point%26reg%3B+ Notch Point®
Spot and Chamfer (330) Geometry Spot+and+Chamfer+ Spot and Chamfer
Standard (2901) Geometry Standard+ Standard
Structural Steel (53) Geometry Structural+Steel+ Structural Steel
Thin Wall (53) Geometry Thin+Wall+ Thin Wall

Hand of Holder

Right (130) Hand of Holder Right+ Right

Hardware Compatibility

8T-6 Torx® Driver (1) Hardware Compatibility 8T-6+Torx%26reg%3B+Driver+ 8T-6 Torx® Driver

Head Connection Size

Hole Diameter

Indexable Tool Type

0.63 and 0.709 in Turn/Drill Combination Tool (1) Indexable Tool Type 0.63+and+0.709+in+Turn%2FDrill+Combination+Tool+ 0.63 and 0.709 in Turn/Drill Combination Tool
APX™ 63, 70, 76, 83, 89 and 95 Series Pilot Heads and Port Contour Cutter (1) Indexable Tool Type APX%26trade%3B+63%2C+70%2C+76%2C+83%2C+89+and+95+Series+Pilot+Heads+and+Port+Contour+Cutter+ APX™ 63, 70, 76, 83, 89 and 95 Series Pilot Heads and Port Contour Cutter
APX™ 70, 76, 83, 89 and 95 Series Pilot Heads (1) Indexable Tool Type APX%26trade%3B+70%2C+76%2C+83%2C+89+and+95+Series+Pilot+Heads+ APX™ 70, 76, 83, 89 and 95 Series Pilot Heads
AccuThread 856® Thread Mill (5) Indexable Tool Type AccuThread+856%26reg%3B+Thread+Mill+ AccuThread 856® Thread Mill
Drill (2) Indexable Tool Type Drill+ Drill
GEN3SYS® Pilot Heads and Port Contour Cutter (1) Indexable Tool Type GEN3SYS%26reg%3B+Pilot+Heads+and+Port+Contour+Cutter+ GEN3SYS® Pilot Heads and Port Contour Cutter
Port Contour Cutter (2) Indexable Tool Type Port+Contour+Cutter+ Port Contour Cutter
Spade Drill (8) Indexable Tool Type Spade+Drill+ Spade Drill

Inscribed Circle

Insert Compatibility

4T-05T203-P, 4T-05T203-M, 4T-05T203-H, 4T-05T203-K and 4T-05T203-N (1) Insert Compatibility 4T-05T203-P%2C+4T-05T203-M%2C+4T-05T203-H%2C+4T-05T203-K+and+4T-05T203-N+ 4T-05T203-P, 4T-05T203-M, 4T-05T203-H, 4T-05T203-K and 4T-05T203-N
QDSI 34® 80 deg TCGT-110202, TCMT-110204, TCMT-110208, CCGT-060202 and CCMT-060204 (1) Insert Compatibility QDSI+34%26reg%3B+80+deg+TCGT-110202%2C+TCMT-110204%2C+TCMT-110208%2C+CCGT-060202+and+CCMT-060204+ QDSI 34® 80 deg TCGT-110202, TCMT-110204, TCMT-110208, CCGT-060202 and CCMT-060204
TN100K- and TN150K- (2) Insert Compatibility TN100K-+and+TN150K-+ TN100K- and TN150K-
TP075K-NPT/NPTF/BSPT and TP075K-UN/ISO/BSPP (1) Insert Compatibility TP075K-NPT%2FNPTF%2FBSPT+and+TP075K-UN%2FISO%2FBSPP+ TP075K-NPT/NPTF/BSPT and TP075K-UN/ISO/BSPP
TP100K-NPT/NPTF/BSPT (1) Insert Compatibility TP100K-NPT%2FNPTF%2FBSPT+ TP100K-NPT/NPTF/BSPT
TP100K-UN/ISO/BSPP and TP100K-UN/UNJI (1) Insert Compatibility TP100K-UN%2FISO%2FBSPP+and+TP100K-UN%2FUNJI+ TP100K-UN/ISO/BSPP and TP100K-UN/UNJI
XC.. 0803.. and XC.. 09T3 (1) Insert Compatibility XC..+0803..+and+XC..+09T3+ XC.. 0803.. and XC.. 09T3

Insert Size

Insert Style

Inside Diameter

Inside Hole Diameter

1.995 in (1) Inside Hole Diameter 1.995+in 1.995 in
2.495 in (1) Inside Hole Diameter 2.495+in 2.495 in
2.995 in (1) Inside Hole Diameter 2.995+in 2.995 in
3.495 in (1) Inside Hole Diameter 3.495+in 3.495 in
3.995 in (1) Inside Hole Diameter 3.995+in 3.995 in

Manufacturer's Grade

CTCP425 (1) Manufacturer's Grade CTCP425+ CTCP425
CTCP435 (1) Manufacturer's Grade CTCP435+ CTCP435
CTPP430 (1) Manufacturer's Grade CTPP430+ CTPP430
K10 (148) Manufacturer's Grade K10+ K10
K20 (432) Manufacturer's Grade K20+ K20
K25 (3) Manufacturer's Grade K25+ K25
K35 (190) Manufacturer's Grade K35+ K35
P30 (59) Manufacturer's Grade P30+ P30
P35 (9) Manufacturer's Grade P35+ P35

Material

Carbide (120) Material Carbide+ Carbide
Cermet (1) Material Cermet+ Cermet
Micrograin Brazed Carbide (11) Material Micrograin+Brazed+Carbide+ Micrograin Brazed Carbide
Micrograin Carbide (78) Material Micrograin+Carbide+ Micrograin Carbide
Micrograin Carbide/Steel Shank (55) Material Micrograin+Carbide%2FSteel+Shank+ Micrograin Carbide/Steel Shank
Micrograin Carbide/Steel Shank/Brazed Tip (24) Material Micrograin+Carbide%2FSteel+Shank%2FBrazed+Tip+ Micrograin Carbide/Steel Shank/Brazed Tip
Solid Carbide (276) Material Solid+Carbide+ Solid Carbide

Material Grade

Maximum Bore Depth

Maximum Bore Depth - Largest Bar

0.812 in (1) Maximum Bore Depth - Largest Bar 0.812+in 0.812 in
1-3/4 in (1) Maximum Bore Depth - Largest Bar 1-3%2F4+in 1-3/4 in
2.187 in (2) Maximum Bore Depth - Largest Bar 2.187+in 2.187 in
2-3/16 in (1) Maximum Bore Depth - Largest Bar 2-3%2F16+in 2-3/16 in
2-5/16 in (1) Maximum Bore Depth - Largest Bar 2-5%2F16+in 2-5/16 in
3-7/8 in (1) Maximum Bore Depth - Largest Bar 3-7%2F8+in 3-7/8 in
4 in (2) Maximum Bore Depth - Largest Bar 4+in 4 in
55 mm (4) Maximum Bore Depth - Largest Bar 55+mm 55 mm
100 mm (3) Maximum Bore Depth - Largest Bar 100+mm 100 mm

Maximum Bore Depth - Smallest Bar

1/4 in (1) Maximum Bore Depth - Smallest Bar 1%2F4+in 1/4 in
1/2 in (4) Maximum Bore Depth - Smallest Bar 1%2F2+in 1/2 in
1.312 in (1) Maximum Bore Depth - Smallest Bar 1.312+in 1.312 in
2.187 in (2) Maximum Bore Depth - Smallest Bar 2.187+in 2.187 in
2-3/8 in (1) Maximum Bore Depth - Smallest Bar 2-3%2F8+in 2-3/8 in
12 mm (4) Maximum Bore Depth - Smallest Bar 12+mm 12 mm
60 mm (1) Maximum Bore Depth - Smallest Bar 60+mm 60 mm
63 mm (2) Maximum Bore Depth - Smallest Bar 63+mm 63 mm

Maximum Bore Diameter

Maximum Drill Diameter

Maximum Drill Size

Maximum Hole Depth

3/4 in (2) Maximum Hole Depth 3%2F4+in 3/4 in
1 in (5) Maximum Hole Depth 1+in 1 in
1-1/2 in (9) Maximum Hole Depth 1-1%2F2+in 1-1/2 in
19.05 mm (2) Maximum Hole Depth 19.05+mm 19.05 mm
25.4 mm (4) Maximum Hole Depth 25.4+mm 25.4 mm
38.1 in (1) Maximum Hole Depth 38.1+in 38.1 in
38.1 mm (8) Maximum Hole Depth 38.1+mm 38.1 mm

Maximum Overall Length

2.562 in (1) Maximum Overall Length 2.562+in 2.562 in
3-3/8 in (1) Maximum Overall Length 3-3%2F8+in 3-3/8 in
3-1/2 in (4) Maximum Overall Length 3-1%2F2+in 3-1/2 in
5.562 in (3) Maximum Overall Length 5.562+in 5.562 in
90 mm (4) Maximum Overall Length 90+mm 90 mm
141 mm (3) Maximum Overall Length 141+mm 141 mm

Minimum Bore Diameter

Back

REFINE SELECTION BY